Solutions

EPOWER open-frame generator set: a professional choice for full-scenario basic power solutions

As the core basic model of industrial-grade power generation equipment, EPOWER open-frame generator set has a high cost-effectiveness, flexible adaptability and reliable performance, and builds a full-power coverage solution from basic power consumption to complex loads, which deeply meets the power guarantee needs of diversified scenarios.

1. Minimalist architecture design, freeing up space and operation and maintenance value

Adopting a four-in-one integrated structure of engine, alternator, control panel and common base, the whole machine follows the modular design concept:

• Space efficiency: The open layout without casing is smaller than the closed unit with the same power 40% smaller, 30% lighter, removable heavy-duty mobile wheels as standard at the bottom (optional 3-ton forklift slot), one person can move within 10 meters, and deployment efficiency in restricted scenarios such as narrow construction sites and rooftop platforms is increased by 60%.

• Heat dissipation performance: The engine compartment reserves a 300mm heat dissipation spacing, and is equipped with an intelligent temperature-controlled silicone oil fan. When running at full load in a high temperature environment of 50℃, the oil temperature is controlled within 110℃, avoiding the risk of "boiling", and supporting 24-hour continuous operation.

• Electrical protection: The control panel and generator adopt IP23 protection level, and the wiring terminals are equipped with waterproof rubber sleeves as standard. When dealing with light rain and dusty environments, the insulation resistance decrease rate is delayed by 35% compared with similar products, which meets the needs of outdoor open-air operations.

2. Full-brand power matrix, accurate matching of load requirements

Integrate 12 major brand engine resources (Cummins, Perkins, Scania, Mitsubishi, Weichai, etc.), covering 20-2000kW Power range, supports diesel, natural gas, gasoline and other fuel types:

• Small power range (10-50kW): Suitable for home emergency and small shops, equipped with single-cylinder/twin-cylinder engines, standard intelligent AVR voltage regulator, steady-state voltage fluctuation rate ≤±1%, can stably drive inductive loads such as refrigerators and air conditioners, cold start temperature as low as -15℃ (with preheating device).

• Medium power segment (50-500kW): For construction sites and small factories, turbocharged models are used, with transient load response time of<5 seconds, supporting the start-up of impact equipment such as welding machines (60% temporary load rate) and concrete mixers, and the control panel integrates overload / Under-frequency dual protection, fault response time <0.2 seconds.

• High power segment (500kW+): Applied to data centers and hospitals, equipped with multi-machine parallel synchronization modules (supporting 8 parallel machines), the voltage phase difference is controlled within ±1.5°, and with intelligent load balancing system to achieve N+1 Redundant backup, power failure switching time<200ms, ensuring continuous operation of precision loads such as MRI equipment and servers.

3. Deep adaptation of the entire industry to build a safe line of defense for electricity use

• Industrial Production: Provide ±0.5Hz frequency stability for automated production lines and adapt to PLC control equipment; standard anti-static grounding terminals reduce the impact of electromagnetic interference on sensors and avoid product defects caused by voltage fluctuations.

• Commercial scenario: The shopping mall/hotel application model can be equipped with an optional noise reduction apron (noise ≤85dB at 1 meter after installation) to meet the environmental requirements during business hours; built-in ATS automatic switching device, which starts within 10 seconds after the mains power is interrupted to maintain the continuous operation of elevators and cold chain equipment.

• Medical field: Passed ISO 13485 medical-grade certification, the engine vibration value is controlled at ≤2.5mm/s to avoid resonance interference to precision medical equipment (such as CT machines); equipped with a dual-battery redundant starting system, the low-temperature starting success rate is increased to 99.7%.

• Remote areas: Plateau-type units are equipped with altitude compensation devices (applicable below 4,000 meters), and the power attenuation rate is ≤8%; coastal models use cathodic protection anti-corrosion treatment, and the insulation life of the generator winding is extended by 25% to cope with salt spray erosion.

4. Practical design to reduce full-cycle costs

• Convenience of maintenance: The open structure increases the access efficiency of wearing parts such as filters and belts by 50%, and the daily maintenance time is shortened to 20 minutes; the standard maintenance cycle reminder light (based on the number of operating hours) avoids the risk of failure caused by missed maintenance.

• Fuel economy: The high-pressure common rail engine saves 12% of fuel compared to traditional models. When the 500kW unit is running at full load, the fuel consumption per hour is ≤110L. It is equipped with a 150L built-in fuel tank (optional 300L expansion), meeting 8 Hours of continuous power supply demand.

• Cost-effectiveness: 30% lower cost than closed units of the same power, 3 years/5000 hours warranty for core components (engine, generator), annual average failure rate controlled below 1.2%, and full life cycle operation and maintenance costs reduced by 22%.

EPOWER open-frame generator set is "basic but not basic" ’s design concept, while maintaining high cost performance, through precise power classification, strict environmental adaptation and humanized operation and maintenance design, it has become the cornerstone of reliability for industrial standby, temporary power supply and emergency guarantee scenarios, and uses professional technology to ensure the stable output of every kilowatt-hour of electricity.